Video demonstration of BioDiesel in Lantern
BIODIESEL (B100) shown in this lantern was purchased in 1999.
1. Fill lantern with BioDiesel.
2. Put cap (Part #149) back on lantern.
3. Add pressure, using EZ-Pump attachment, to approx. 2 or 3 on gauge. Overpressure can cause preheated to stop operating. Release pressure, and re-light preheated again.
4. Fill alcohol cup (part #35) with alcohol, - Light both alcohol cup and preheated.
5. Allow preheating time of 2-½ to 3 minutes, before turning on/off knob (Part #111) ("ON" position is 6:00).
6. If lantern does not light, turn knob off (Part #111) to the 12:00 repeat step 3 to 5
Instructional Text with Photo's, Click here
Note* If you have a problem with your BioDiesel, you may want to add 10 - 40% of another type fuel to the BioDiesel to increase flashpoint.
