























Petromax Cool Box 50 Litre alpine white
€299.99*
Available, delivery time: 2-4 days
SKU: KX50

Adhesive Pad for Petromax Cool Box kx50 grey with dragon logo
Colour: grey | Size: 50 litres | Version: with dragon logo
€49.9900*
Adhesive Pad for Petromax Cool Box kx50 grey with dragon logo
Colour: grey | Size: 50 litres | Version: with dragon logo
€49.9900*

Adhesive Pad for Petromax Cool Box kx50 grey with lines
Colour: grey | Size: 50 litres | Version: with lines
€49.9900*
Adhesive Pad for Petromax Cool Box kx50 grey with lines
Colour: grey | Size: 50 litres | Version: with lines
€49.9900*



Adhesive Pad for Petromax Cool Box kx50 brown with lines
Colour: Brown | Size: 50 litres | Version: with lines
€49.9900*
Adhesive Pad for Petromax Cool Box kx50 brown with lines
Colour: Brown | Size: 50 litres | Version: with lines
€49.9900*

Adhesive Pad for Petromax Cool Box kx50 brown with dragon logo
Colour: Brown | Size: 50 litres | Version: with dragon logo
€49.9900*
Adhesive Pad for Petromax Cool Box kx50 brown with dragon logo
Colour: Brown | Size: 50 litres | Version: with dragon logo
€49.9900*

Dutch Oven ft4.5 with a plane bottom surface
Size: ft4.5 | Version: without legs (plane bottom surface)
€79.9900*
Dutch Oven ft4.5 with a plane bottom surface
Size: ft4.5 | Version: without legs (plane bottom surface)
€79.9900*
Petromax Cool Box 50 Litre alpine white
This makes the Petromax Cool Box an ultra-passive cooling system when on the go:
- electricity independent Cool Box with ultra-passive cooling system: ice, cold packs or dry ice for up to 12 days of chilled food and drinks
- 50 l volume: 70 x 0.33 l cans or 20 x 1 l bottles
- insulating layer of 45 mm: long internal temperature resistance
- practical: lashing points, ergonomic carrying handles, non-slip rubber fasteners, can be operated with one hand, rubber legs for a firm footing and air circulation from below
- easy cleaning: integrated drainage system for draining melt water
- can be ideally combined with the tray50 Dry Rack Basket (2 units)
Being well prepared for days without electricity? The Petromax Cool Box kx50 allows you to provide for yourself during a multi-day adventure. The ultra passive cooling system only operates with commercially available ice, cold packs or dry ice. The double-walled, void-insulated kx50 keeps ice cool for up to 12 days on end without a compressor or absorber.
Unbeatable benefit: The inside of the kx50 for a volume of 50 l is designed in such a way that either 70 x 0.33 l cans or 20 x 1 l bottles can be stored and transported in an upright position. Also freshly caught fish or brought along provisions have their ideal storage place in your Petromax Cool Box.
High calibre cooling system
With an insulation layer of at least 45 mm the Petromax Cool Box guarantees you a very long temperature resistance when used outdoors. However, this is not all: The robust PE corpus is very stable so that you can easily use the box as raised seat or platform. As a result, you can comfortably cast your fishing line or get an overview over your surroundings. In addition, thanks to the edged design of the kx50 it can be well stacked or stowed inside the boot or below deck. Refilling of ice or the cleaning of the cooler later on are simplified by the integrated draining system. Thus, you can drain melt water at any time, also during use and prolong the cooling time according to your requirements.
Handling fit for adventure
Especially for outdoor cooking and for use in nature the demands on reliable equipment are high. Next to the extremely long temperature stability there are further functions which distinguish the Cool Box as being fit for adventure: cavities in the lid enable criss-cross lashing. This way, you safely stow your kx50 for transport on deck of a boat or on the loading area of your pickup truck. The ergonomic handles on each side can also be used as belt guides which allows you an opening in securely tied down condition. The non-slip rubber fasteners can be operated with one hand and can also be well managed with wet fingers. You can additionally secure your supplies from wild animals via reinforced locking plates with a commercially available U-lock. Four rubber feet under the Cool Box ensure a firm stand as well as ventilation from below.
With the Petromax Cool Box kx50 nothing stands in the way of your original over-the-fire-cooking experience.
Proper usage of the Cool Box:
•Before use, cool down the Cool Box in a cold room or with ice
•Only stock with pre-cooled beverages or food
•At best use larger blocks of ice in one piece
•Always place dry ice, cold packs or ice on top, as cold sinks downwards
•Open purposeful and seldom
•When on the way store the box at a cool, shady place and out of direct sunlight
•Store and transport only in upright position
Technical details
Material: PE
Outer dimensions (W x H x D): 68.5 x 50 x 48.5 cm
Inner dimensions (L x W x H): 42.5 x 29.2 x 34 cm
Dimensions with packaging (W x H x D): 70 x 52 x 50 cm
Weight (in kg): 14.9
Weight with packaging (in kg): 17.3
Filling capacity (max.): 50 l
Scope of delivery
1 x Petromax Cool Box kx50
1 x User manual
Go to User manual >>
Your Accessories
Your Accessories
Dry Rack Basket for Petromax Cool Box kx50
Size: 50 litres
Why is the Petromax Dry Rack Basket the ideal complement for your Cool Box: Dry storage of delicate foodSecond temperature level due to distance from the iceIdeal for placing provisions close at handSturdy and water-repellent materialCustom-fit for Petromax Cool Box kx50 (2 baskets) and kx75 (3 baskets)The Petromax Dry Rack Basket for the Cool Box provides for cool storage of delicate food such as fresh fruit and vegetables. The basket sits perfectly on top of the inner edge of the Cool Box and creates an additional temperature level and a dry storage area away from the ice. Thanks to the Dry Rack Basket your provisions will always be in reach and well organised. Thanks to its water-repellent coating it can be cleaned in no time. The sturdy steel basket is durable and will continue to look appealingfor years to come. Raw meat and fish as well as fatty foods need to be packaged hygienically so they do not come into direct contact with the Dry Rack Basket.The Petromax Dry Rack Basket is available in two sizes and is one of the accessory modules enabeling you to tailor your passive cooling system to your personal requirements. The Dry Rack Basket kx50-tray can be used inside your Cool Box kx50 as well as the kx75. Technical detailsMaterial: steel, powder-coatedDimensions (approx.) (H x W x D): 14 x 36 x 23 cmWeight (approx.): 450 gScope of delivery1 x Petromax Dry Rack Basket for Petromax kx50/kx75 Cool Box
from €14.99*
Seat Cushion for Petromax Cool Box kx50
Size: 50 litres
For soothing outdoor breaks – The Petromax Seat Cushion for the Cool Box kx50
With the Seat Cushion for the large Petromax Cool Box kx50 you turn your ultra-passive cooling system also into a resting place to go. The core of the cushion made of permanently elastic foam forms the key foundation for nature relaxation. It provides for an ideal pressure distribution under load and thus pleasant seating comfort. The Seat Cushion is covered with durable ripstop fabric (strength 600D). That way it endures frequent use and remains resistant against dirt. Traces of use such as mud can be easily brushed out, strongly dried up spots can be removed with a damp cloth.
The special mesh fabric underneath the Seat Cushion creates a strong anti-slip coating. This distributes support to the cushion and creates a firm seat for you at camp. At the same time air circulation is promoted and thus also ideal drying after a rain shower. The embroidered logo on the topside renders the Seat Cushion dragon strong and complete in its design.
Comfortable at the touch of a button – press-stud system for your Cool Box Seat Cushion
Via the practical 4-point press-stud system you are able to quickly apply and remove the Seat Cushion. The suitable counterparts for mounting onto the Cool Box lid are part of the scope of delivery and you only need to install them before the first use.
Thus prepared you can start into hot-cold expeditions and adventures holidays with the guys.
With functional Petromax accessories you remain flexible: The Seat Cushion with press-stud system can be combined with the Adhesive Pad for the Petromax Cool Box kx50 and provides you with the necessary freedom.
Instructions for installation on the Cool Box
Tools needed: Phillips screwdriver
1. First, clean the four depressions embedded in the lid of the kx50 and dry them well.
2. Screw on the included counterparts of the press studs to the depressions in the lid of the Cool Box. The counterparts may only be fastened by hand for not to squeeze or otherwise damage the rubber seals of the kx50.
3. Place the Seat Cushion (mesh fabric facing downwards) on top of the Cool Box and align flush.
4. Join together each of the four press studs at the straps with the suitable counterparts at the Cool Box.
For removal please open the press studs of the four cushion straps one by one and sideways away from the lid to avoid any tearing.
Technical details
Material (upper side): ripstop fabric (600D)
Material (bottom side): mesh fabric
Material (inside): foam
Dimensions (H x W x D): 5.5 x 66 x 46.5 cm
Weight: 995 g
Scope of delivery
1 x Sitzkissen für Petromax Kühlbox kx50
4 x counterparts for press studsUser Manual
Go to User manual >>
from €39.99*
Adhesive Pad for Petromax Cool Box kx50 grey with dragon logo
Colour: grey | Size: 50 litres | Version: with dragon logo
Extra support for any adventure: The Adhesive Pad for the Petromax Cool Box
With the Adhesive Pad you not only effectively protect your Cool Box kx50 from scratches and bumps but at the same time ensure for more grip. The thin cover made of synthetic foam is made custom-fit for the surface of the ultra-passive cooling systems kx50. The dense material creates a durable protective layer defying wind and weather. Thus, you and your Cool Box profit from the special protection against moisture, UV- radiation and temperature effects. Even if you have been in outdoor action up to the knee: Rough dirt can be removed easily by brushing or wiping off. In just a few steps the anti-slip pad is applied and directly provides you with more support during your very own adventures.
The lashing points have been omitted in the pad; thus, you can still secure your ultra-passive cooling system before transport. The extra layer is available in two colours and in two designs each. Free selection between brown and grey – either with lines and Petromax lettering or with traditional dragon logo: You alone decide what your next nature experience looks like.
Non-slip stand or comfortable seat? Both, because with functional Petromax accessories you stay flexible. The installed Adhesive Pad can be used in combination with the Seat Cushion for the Petromax Cool Box kx50 and provides you with the necessary freedom.
How to apply the Adhesive Pad the right way
1. Before application, make sure that the surface of the lid is free of dirt by cleaning it thoroughly with water and a customary dishwashing detergent. Afterwards, dry with a cloth.
2. Remove the adhesive film on the back and hold the Adhesive Pad just over the lid of the Cool Box and align by centre.
3. When the position is correct start on one side of the lid and apply the edge of the Adhesive Pad flush. Do not press down yet, otherwise you cannot correct the position anymore! Now let the rest of the adhesive area follow slowly, until it rests completely on the Cool Box.
4. As soon as the edges lay exact you can press down the Adhesive Pad firmly with the palms of your hands.
Technical Details
Material: synthetic foam
Dimensions: (H x W x D): 0.3 x 65.5 x 45.5 cm
Weight packed: 560 g
Colour: brown, grey
Decor: lines and lettering, dragon logo (cut)
Scope of delivery
1 x Adhesive Pad for Petromax Cool Box kx50
from €39.99*
Adhesive Pad for Petromax Cool Box kx50 grey with lines
Colour: grey | Size: 50 litres | Version: with lines
Extra support for any adventure: The Adhesive Pad for the Petromax Cool Box
With the Adhesive Pad you not only effectively protect your Cool Box kx50 from scratches and bumps but at the same time ensure for more grip. The thin cover made of synthetic foam is made custom-fit for the surface of the ultra-passive cooling systems kx50. The dense material creates a durable protective layer defying wind and weather. Thus, you and your Cool Box profit from the special protection against moisture, UV- radiation and temperature effects. Even if you have been in outdoor action up to the knee: Rough dirt can be removed easily by brushing or wiping off. In just a few steps the anti-slip pad is applied and directly provides you with more support during your very own adventures.
The lashing points have been omitted in the pad; thus, you can still secure your ultra-passive cooling system before transport. The extra layer is available in two colours and in two designs each. Free selection between brown and grey – either with lines and Petromax lettering or with traditional dragon logo: You alone decide what your next nature experience looks like.
Non-slip stand or comfortable seat? Both, because with functional Petromax accessories you stay flexible. The installed Adhesive Pad can be used in combination with the Seat Cushion for the Petromax Cool Box kx50 and provides you with the necessary freedom.
How to apply the Adhesive Pad the right way
1. Before application, make sure that the surface of the lid is free of dirt by cleaning it thoroughly with water and a customary dishwashing detergent. Afterwards, dry with a cloth.
2. Remove the adhesive film on the back and hold the Adhesive Pad just over the lid of the Cool Box and align by centre.
3. When the position is correct start on one side of the lid and apply the edge of the Adhesive Pad flush. Do not press down yet, otherwise you cannot correct the position anymore! Now let the rest of the adhesive area follow slowly, until it rests completely on the Cool Box.
4. As soon as the edges lay exact you can press down the Adhesive Pad firmly with the palms of your hands.
Technical Details
Material: synthetic foam
Dimensions: (H x W x D): 0.3 x 65.5 x 45.5 cm
Weight packed: 560 g
Colour: brown, grey
Decor: lines and lettering, dragon logo (cut)
Scope of delivery
1 x Adhesive Pad for Petromax Cool Box kx50
from €39.99*
Locking Plate with Bottle Opener for Cool Box
Safe locking of the Petromax Cool Box and easy opening of beverage bottles: The Locking Plate with integrated bottle opener offers you a practical dual function for your outdoor adventures. The stainless-steel accessory fits perfectly in the position of the lower locking plate of your Petromax Cool Box and is simply being exchanged for it. That way, you still protect your provisions from unauthorised access and at the same time are able to open beverage bottles with customary crown cork seal. The Locking Plate is universal and thus suitable for all Petromax Cool Boxes.
Complement your ultra-passive cooling system by one more clever accessory and ready yourself for upcoming experiences in nature.
Made in Germany.
Technical details
Material: stainless steel
Material thickness: 4 mm
H x W x D: 8.3 x 8.3 x 1.5 cm
Weight: 120 g
€19.99*
Lock Bracket for Petromax Cool Box kx-lockb
Additional security for calm nights under the open sky
With the Lock Bracket Petromax offers a useful accessory to secure your ultra passive cooling system. That way, you can protect your Cool Box from theft by permanently locking it to a tree near your camp or to the bumper of your pick-up truck.
Insert and lock down
You only need to insert the Lock Bracket made of robust 4 mm strong stainless steel from above into one of the handles of your Petromax Cool Box. As soon as you close the box you automatically fix the Lock Bracket to the spot. Thus, it cannot be removed from the outside and enables you to additionally secure your Petromax Cool Box with chain and lock. You can, therefore, rest easy if your provisions are outside your tent or if you leave for an exploration tour. Thanks to the integrated bottle opener your Lock Bracket will be a reliable tool against your thirst for adventure in case, once in a while, you do not use it for securing.
Manufactured in Germany.
Technical details
Material: stainless steel
H x W x D: 10.4 x 2.2 x 0.4 cm
Weight: 100 g
€19.99*
Adhesive Pad for Petromax Cool Box kx50 brown with lines
Colour: Brown | Size: 50 litres | Version: with lines
Extra support for any adventure: The Adhesive Pad for the Petromax Cool Box
With the Adhesive Pad you not only effectively protect your Cool Box kx50 from scratches and bumps but at the same time ensure for more grip. The thin cover made of synthetic foam is made custom-fit for the surface of the ultra-passive cooling systems kx50. The dense material creates a durable protective layer defying wind and weather. Thus, you and your Cool Box profit from the special protection against moisture, UV- radiation and temperature effects. Even if you have been in outdoor action up to the knee: Rough dirt can be removed easily by brushing or wiping off. In just a few steps the anti-slip pad is applied and directly provides you with more support during your very own adventures.
The lashing points have been omitted in the pad; thus, you can still secure your ultra-passive cooling system before transport. The extra layer is available in two colours and in two designs each. Free selection between brown and grey – either with lines and Petromax lettering or with traditional dragon logo: You alone decide what your next nature experience looks like.
Non-slip stand or comfortable seat? Both, because with functional Petromax accessories you stay flexible. The installed Adhesive Pad can be used in combination with the Seat Cushion for the Petromax Cool Box kx50 and provides you with the necessary freedom.
How to apply the Adhesive Pad the right way
1. Before application, make sure that the surface of the lid is free of dirt by cleaning it thoroughly with water and a customary dishwashing detergent. Afterwards, dry with a cloth.
2. Remove the adhesive film on the back and hold the Adhesive Pad just over the lid of the Cool Box and align by centre.
3. When the position is correct start on one side of the lid and apply the edge of the Adhesive Pad flush. Do not press down yet, otherwise you cannot correct the position anymore! Now let the rest of the adhesive area follow slowly, until it rests completely on the Cool Box.
4. As soon as the edges lay exact you can press down the Adhesive Pad firmly with the palms of your hands.
Technical Details
Material: synthetic foam
Dimensions: (H x W x D): 0.3 x 65.5 x 45.5 cm
Weight packed: 560 g
Colour: brown, grey
Decor: lines and lettering, dragon logo (cut)
Scope of delivery
1 x Adhesive Pad for Petromax Cool Box kx50
from €39.99*
Adhesive Pad for Petromax Cool Box kx50 brown with dragon logo
Colour: Brown | Size: 50 litres | Version: with dragon logo
Extra support for any adventure: The Adhesive Pad for the Petromax Cool Box
With the Adhesive Pad you not only effectively protect your Cool Box kx50 from scratches and bumps but at the same time ensure for more grip. The thin cover made of synthetic foam is made custom-fit for the surface of the ultra-passive cooling systems kx50. The dense material creates a durable protective layer defying wind and weather. Thus, you and your Cool Box profit from the special protection against moisture, UV- radiation and temperature effects. Even if you have been in outdoor action up to the knee: Rough dirt can be removed easily by brushing or wiping off. In just a few steps the anti-slip pad is applied and directly provides you with more support during your very own adventures.
The lashing points have been omitted in the pad; thus, you can still secure your ultra-passive cooling system before transport. The extra layer is available in two colours and in two designs each. Free selection between brown and grey – either with lines and Petromax lettering or with traditional dragon logo: You alone decide what your next nature experience looks like.
Non-slip stand or comfortable seat? Both, because with functional Petromax accessories you stay flexible. The installed Adhesive Pad can be used in combination with the Seat Cushion for the Petromax Cool Box kx50 and provides you with the necessary freedom.
How to apply the Adhesive Pad the right way
1. Before application, make sure that the surface of the lid is free of dirt by cleaning it thoroughly with water and a customary dishwashing detergent. Afterwards, dry with a cloth.
2. Remove the adhesive film on the back and hold the Adhesive Pad just over the lid of the Cool Box and align by centre.
3. When the position is correct start on one side of the lid and apply the edge of the Adhesive Pad flush. Do not press down yet, otherwise you cannot correct the position anymore! Now let the rest of the adhesive area follow slowly, until it rests completely on the Cool Box.
4. As soon as the edges lay exact you can press down the Adhesive Pad firmly with the palms of your hands.
Technical Details
Material: synthetic foam
Dimensions: (H x W x D): 0.3 x 65.5 x 45.5 cm
Weight packed: 560 g
Colour: brown, grey
Decor: lines and lettering, dragon logo (cut)
Scope of delivery
1 x Adhesive Pad for Petromax Cool Box kx50
from €39.99*
For the next Adventure
For the next Adventure
Petromax Enamel Plates white (2 pieces in Set)
Colour: white | Size: M
Why the Petromax Enamel Plates are the tough tableware for outdoor chefs: Food-safe tableware for outdoor adventurers Hygienic and impact-resistant thanks to stainless-steel rim Scratch-resistant andquick to clean thanks to easy handling Ideal for on the move due to low weight Available in three different sizesOutdoor fans appreciate the low weight and durability of enamel tableware which makes the Petromax Enamel Plates a necessity for your equipment. Not only at the campfire, our plates enable easy barbecue, but also on your home kitchen table, the retro design is a real eye catcher. The material: Durable and robustEnamel provides many advantages that are combined in the Petromax tableware. The compound of glass and steel makes the plates extremely resistant and robust. The fired surface is heat and scratch-resistant. It can easily be cleaned without great effort. The plates will not corrode and are fade-resistant. They will be on your side for an outdoor lifetime!Convenience with styleThe protective ring of stainless steel hygienically locks and protects the delicate edge of your plate. Available in black or white, this plate is a trusty companion for every adventurer looking for something handy, light-weight and stylish. Each package contains a set of two enamel plates of one colour. Technical data Material: steel, enamelledDimensions, approx. (H x W x D): 2.5 x 22.5 x 22.5 cmDimensions with packaging, approx. (H x W x D): 3.8 x 23 x 23 cmWeight, approx.: 206 gWeight with packaging, approx.: 450 gScope of delivery2 x Petromax Enamel Plate white, 2 pieces in set (22 cm), px-plate-w
from €19.99*
Petromax Enamel Plates black (2 pieces in Set)
Colour: Black | Size: M
Why the Petromax Enamel Plates are the tough tableware for outdoor chefs: Food-safe tableware for outdoor adventurers Hygienic and impact-resistant thanks to stainless-steel rim Scratch-resistant andquick to clean thanks to easy handling Ideal for on the move due to low weight Available in three different sizesOutdoor fans appreciate the low weight and durability of enamel tableware which makes the Petromax Enamel Plates a necessity for your equipment. Not only at the campfire, our plates enable easy barbecue, but also on your home kitchen table, the retro design is a real eye catcher. The material: Durable and robustEnamel provides many advantages that are combined in the Petromax tableware. The compound of glass and steel makes the plates extremely resistant and robust. The fired surface is heat and scratch-resistant. It can easily be cleaned without great effort. The plates will not corrode and are fade-resistant. They will be on your side for an outdoor lifetime!Convenience with styleThe protective ring of stainless steel hygienically locks and protects the delicate edge of your plate. Available in black or white, this plate is a trusty companion for every adventurer looking for something handy, light-weight and stylish. Each package contains a set of two enamel plates in black. Technical data Material: steel, enamelledDimensions, approx. (H x W x D): 2.5 x 22.5 x 22.5 cmDimensions with packaging, approx. (H x W x D): 3.8 x 23 x 23 cmWeight, approx.: 206 gWeight with packaging, approx.: 450 gScope of delivery2 x Petromax Enamel Plate black, 2 pieces in set (22 cm), px-plate-s
from €19.99*
Dutch Oven ft4.5 with a plane bottom surface
Size: ft4.5 | Version: without legs (plane bottom surface)
The original Petromax Dutch Oven is ideally suited to cooking and baking in the open air or in the oven at home. Cast-iron pots exist since the 18th century. Even at that time the unique properties of cast iron were appreciated. With the Dutch Oven, Petromax takes up this tradition and also provides the Dutch Oven with a multitude of refined details.Cast iron Petromax qualityThanks to the amazing characteristics of cast iron and the special structure of the surface, warmth is efficiently stored and distributed. The pre-treated surface (seasoned finish) makes a first seasoning unnecessary, and the sturdy Dutch Oven can be used right away. In the open air, it is used on an open fire or with charcoal and briquettes. The raised edge of the lid makes it possible to place embers or charcoal also on the Dutch Oven. The Dutch Oven is thus heated from all sides and is for example suitable for baking bread.Great cooking pleasure thanks to sophisticated detailsThe Dutch Oven is provided with ingenious details that make it easy for you to handle and that offer you an amazing cooking experience. The Dutch Oven can be safely lifted thanks to a sturdy handle, and a thermometer hole makes it possible for you to check the temperature without having to lift the lid. When you need it, lifting the hot lid is particularly easy thanks to the Petromax Lid Lifter. Another special feature is that the upturned lid can also be used as a pan. Beside all these ingenious details, the Dutch Oven has a traditional Petromax design: The lid is decorated with the elegant dragon logo, which has always stood for excellent quality and top-of-the-range products. Soups, meat dishes, as well as stews, casseroles and even cakes, can be prepared outstandingly in the Dutch Oven.Available in various sizes and can be completed with practical accessoriesThe Petromax Dutch Oven is available in several sizes, so that the right one can be chosen according to the recipe or the number of persons. The medium-sized model ft4.5 of the Dutch Oven without legs has a capacity of approx. 3.5 litres. It allows to cook meals for up to 2-5 persons. For the Petromax Dutch Oven, other accessories than the Lid Lifter are available, like the Transport and Storage Bag, the Care Conditioner and also cleaning utensils for cast iron. Moreover we offer a Dutch Oven Trivet and Cast-iron Trivets ( for ft4.5 and bigger) that make it possible to cook and bake food without burning anything.Technical dataMaterial: cast ironWeight: approx. 6.9 kgWeight packed: approx. 7.3 kgCapacity pot (max.): 3.5 LCapacity lid (max.): 1 LOuter dimensions (H x W x D): 14.6 x 31 x 27 cmScope of delivery1 x Dutch Oven ft4.5-t plane bottom surface1 x User ManualGo to User manual >>
from €24.99*
Petromax Gas Table with Singular Burner ge45-s
Anschlussdruck: 50 mbar | Size: 1 Burner
PLEASE NOTE: THE PETROMAX GAS TABLES GE45-S / GE90-S ARE AVAILABLE ONLY IN GERMANY AND AUSTRIA! SEE FOR MODEL GE45-S-30 / GE90-S-30 OF THE PETROMAX GAS TABLE TO BE OPERATED IN A NUMBER OF EU COUNTRIES (TABLE AVAILABLE ON PRODUCT PAGE). Dragon fire at the touch of a button:The Gas Tables ge45-s and ge90-s provide reliable and precise heat outdoors anyplace where open fire is prohibited. The Gas Tables are furnished with powerful 5 kW burners that operate with propane. The integrated piezo igniter, automatic flame control and connecting tube with pressure regulator offer safe operation while outdoor cooking with gas. The large windbreak effectively protects the operating burners and thus saves energy. The Gas Tables can be easily used for cooking with cast-iron Dutch Ovens and Fire Skillets, as they have a high load capacity of 80 kg or 100 kg. A specially designed support for cookware also allows for using tea kettles or percolators at the same time. The windbreak and the solid support legs can be mounted and dismounted in no time. That way the Gas Tables can be optimally transported and are ideal companions for houseboat tours, camper vacations or camping trips.
from €189.99*
Petromax Aramid Pro 300 Gloves
Sturdy, resistant rough leather, lined with fireproof aramid fibres – no matter whether stirring a fire or having a barbecue: The well-thought-out material combination of the Aramid Pro 300 Gloves effectively protects hands and forearms from flames and heat.Resistant to contact heat up to 250°CThanks to the fireproof aramid synthetic fibres, the gloves offer optimal protection up to a contact heat of 250°C. Burning objects can be grasped safely when something is grilled or a fire is made, for the leather ensures an outstanding gripping power thanks to its rough surface.Petromax design for each handThe hard-wearing Aramid Pro 300 Gloves are in one size only and therefore perfect for every hand. They also keep forearms safe from flying sparks and flames thanks to long sleeves. The gloves feature the classic Petromax design, of which the dragon logo symbolizes fascination for fire, warmth and light.Technical dataScope of delivery1 x Petromax Aramid Pro 300 GlovesGo to Conformity >>
€34.99*
Wooden Spoon with branding
The Petromax wooden cooking spoon is the perfect tool for all outdoor cooks and kitchen experts. A true natural productThe mixing spoon is made out of local cherry wood, and then oiled. Oiling gives cherry wood its characteristic reddish colouring – which enhances the distinctive grain even more. This grain makes every spoon unique and can thus differ from our illustration.The eye-catcher among spoonsThanks to its classic form with oval shallow bowl and flat handle, the spoon is functional and fits well in the hand. The pyrography of our Petromax logo is really eye-catching.Care tips Wood is a natural material and can crack under extreme conditions. This is why you should not let the Petromax spoon soak in water for a long period of time, but rather thoroughly clean it with warm water and cleaning powder. Then stand it on end and let it air-dry.In order to enjoy your Petromax wooden spoon for a long time, follow these instructions: If oiling diminishes due to use and cleaning, you can rub hot, flavourless vegetal oil or paraffin oil (paraffinum perliquidum) into the spoon. Let it soak in over night and rub surplus oil off. You can repeat this treatment on a regular basis.Technical dataMaterial: Cherry WoodL x W x H (in cm): 1 x 5,9 x 32Weight (in g): 45Weight with packaging (in g): Scope of delivery1 x Wooden spoon with branding
€5.49*
Buff Leather Apron with neck strap
Version: neck strap
Whether for your open-air grilling place or fireplace: The Buff Leather Apron is your perfect companion to protect you and your clothes from dirt and fat spatter. It also provides comfortable fit and optimum durability. Thanks to the adjustable neck strap and waist belt, the Buff Leather Apron is flexible and adjustable. Reinforced threads, riveted straps and belts ensure longevity and highest quality, and also best functionality. The cleverly placed pocket at chest and waist height as well as the lateral support straps hold your towel, grilling and cooking tools right at hand.Through gentle dying and colouring of the material, the natural grain of the buff leather is maintained which gives your apron an original and individual patina. The Buff Leather Apron ab-b in dark brown with cognac coloured applications has an original charm, giving you as chef at the fire a lasting impression.Also available as version with crossed back strap (ab-x). Technical dataWeight: 0,85 kgMaterial: Colour: Scope of delivery1 x Buff Leather Apron with neck strap
€99.99*