Seat Cushion for Petromax Cool Box kx50

Independently cooled – enjoying the freedom Being well prepared for days without electricity? The Petromax Cool Box kx50 allows you to provide for yourself during a multi-day adventure. The ultra-passive cooling system only operates with commercially available ice, cold packs or dry ice. The double-walled, void-insulated kx50 keeps ice cool for up to 12 days on end without a compressor or absorber. Unbeatable benefit: The inside of the kx50 for a volume of 50 L is designed in such a way that either 70 x 0.33 L cans or 20 x 1 L bottles can be stored and transported in an upright position. Also freshly caught fish or brought along provisions have their ideal storage place in your Petromax Cool Box. High calibre cooling systemWith an insulation layer of at least 45 mm the Petromax Cool Box guarantees you a very long temperature resistance when used outdoors. However, this is not all: The robust PE corpus is very stable so that you can easily use the box as raised seat or platform. As a result, you can comfortably cast your fishing line or get an overview over your surroundings. In addition, thanks to the edged design of the kx50 it can be well stacked or stowed inside the boot or below deck. Refilling of ice or the cleaning of the cooler later on are simplified by the integrated draining system. Thus, you can drain melt water at any time, also during use and prolong the cooling time according to your requirements. Handling fit for adventureEspecially for outdoor cooking and for use in nature the demands on reliable equipment are high. Next to the extremely long temperature stability there are further functions which distinguish the Cool Box as being fit for adventure: cavities in the lid enable criss-cross lashing. This way, you safely stow your kx50 for transport on deck of a boat or on the loading area of your pickup truck. The ergonomic handles on each side can also be used as belt guides which allows you an opening in securely tied down condition. The non-slip rubber fasteners can be operated with one hand and can also be well managed with wet fingers. You can additionally secure your supplies from wild animals via reinforced locking plates with a commercially available U-lock. Four rubber feet under the Cool Box ensure a firm stand as well as ventilation from below. With the Petromax Cool Box kx50 nothing stands in the way of your original over-the-fire-cooking experience. Proper usage of the Cool Box• Before use, cool down the Cool Box in a cold room or with ice• Only stock with pre-cooled beverages or food• At best use larger blocks of ice in one piece• Always place dry ice, cold packs or ice on top, as cold sinks downwards• Open purposeful and seldom• When on the way store the box at a cool, shady place and out of direct sunlight• Store and transport only in upright positionTechnical detailsMaterial: PEOuter dimensions (W x H x D): 68.5 x 50 x 48.5 cmInner dimensions (L x W x H): 42.5 x 29.2 x 34 cm Dimensions with packaging (W x H x D): 70 x 52 x 50 cmWeight (in kg): 14.9Weight with packaging (in kg): 17.3Filling capacity (max.): 50 lScope of delivery1 x Petromax Cool Box kx50 sand1 x User manualGo to User manual >>

Independently cooled – enjoying the freedom Being well prepared for days without electricity? The Petromax Cool Box kx50 allows you to provide for yourself during a multi-day adventure. The ultra-passive cooling system only operates with commercially available ice, cold packs or dry ice. The double-walled, void-insulated kx50 keeps ice cool for up to 12 days on end without a compressor or absorber. Unbeatable benefit: The inside of the kx50 for a volume of 50 L is designed in such a way that either 70 x 0.33 L cans or 20 x 1 L bottles can be stored and transported in an upright position. Also freshly caught fish or brought along provisions have their ideal storage place in your Petromax Cool Box. High calibre cooling systemWith an insulation layer of at least 45 mm the Petromax Cool Box guarantees you a very long temperature resistance when used outdoors. However, this is not all: The robust PE corpus is very stable so that you can easily use the box as raised seat or platform. As a result, you can comfortably cast your fishing line or get an overview over your surroundings. In addition, thanks to the edged design of the kx50 it can be well stacked or stowed inside the boot or below deck. Refilling of ice or the cleaning of the cooler later on are simplified by the integrated draining system. Thus, you can drain melt water at any time, also during use and prolong the cooling time according to your requirements. Handling fit for adventureEspecially for outdoor cooking and for use in nature the demands on reliable equipment are high. Next to the extremely long temperature stability there are further functions which distinguish the Cool Box as being fit for adventure: cavities in the lid enable criss-cross lashing. This way, you safely stow your kx50 for transport on deck of a boat or on the loading area of your pickup truck. The ergonomic handles on each side can also be used as belt guides which allows you an opening in securely tied down condition. The non-slip rubber fasteners can be operated with one hand and can also be well managed with wet fingers. You can additionally secure your supplies from wild animals via reinforced locking plates with a commercially available U-lock. Four rubber feet under the Cool Box ensure a firm stand as well as ventilation from below. With the Petromax Cool Box kx50 nothing stands in the way of your original over-the-fire-cooking experience. Proper usage of the Cool Box• Before use, cool down the Cool Box in a cold room or with ice• Only stock with pre-cooled beverages or food• At best use larger blocks of ice in one piece• Always place dry ice, cold packs or ice on top, as cold sinks downwards• Open purposeful and seldom• When on the way store the box at a cool, shady place and out of direct sunlight• Store and transport only in upright positionTechnical detailsMaterial: PEOuter dimensions (W x H x D): 68.5 x 50 x 48.5 cmInner dimensions (L x W x H): 42.5 x 29.2 x 34 cm Dimensions with packaging (W x H x D): 70 x 52 x 50 cmWeight (in kg): 14.9Weight with packaging (in kg): 17.3Filling capacity (max.): 50 lScope of delivery1 x Petromax Cool Box kx50 olive1 x User manual Go to User manual >>

Independently cooled – enjoying the freedom Being well prepared for days without electricity? The Petromax Cool Box kx50 allows you to provide for yourself during a multi-day adventure. The ultra passive cooling system only operates with commercially available ice, cold packs or dry ice. The double-walled, void-insulated kx50 keeps ice cool for up to 12 days on end without a compressor or absorber. Unbeatable benefit: The inside of the kx50 for a volume of 50 l is designed in such a way that either 70 x 0.33 l cans or 20 x 1 l bottles can be stored and transported in an upright position. Also freshly caught fish or brought along provisions have their ideal storage place in your Petromax Cool Box.High calibre cooling systemWith an insulation layer of at least 45 mm the Petromax Cool Box guarantees you a very long temperature resistance when used outdoors. However, this is not all: The robust PE corpus is very stable so that you can easily use the box as raised seat or platform. As a result, you can comfortably cast your fishing line or get an overview over your surroundings. In addition, thanks to the edged design of the kx50 it can be well stacked or stowed inside the boot or below deck. Refilling of ice or the cleaning of the cooler later on are simplified by the integrated draining system. Thus, you can drain melt water at any time, also during use and prolong the cooling time according to your requirements.Handling fit for adventureEspecially for outdoor cooking and for use in nature the demands on reliable equipment are high. Next to the extremely long temperature stability there are further functions which distinguish the Cool Box as being fit for adventure: cavities in the lid enable criss-cross lashing. This way, you safely stow your kx50 for transport on deck of a boat or on the loading area of your pickup truck. The ergonomic handles on each side can also be used as belt guides which allows you an opening in securely tied down condition. The non-slip rubber fasteners can be operated with one hand and can also be well managed with wet fingers. You can additionally secure your supplies from wild animals via reinforced locking plates with a commercially available U-lock. Four rubber feet under the Cool Box ensure a firm stand as well as ventilation from below.With the Petromax Cool Box kx50 nothing stands in the way of your original over-the-fire-cooking experience.Proper usage of the Cool Box:•Before use, cool down the Cool Box in a cold room or with ice•Only stock with pre-cooled beverages or food•At best use larger blocks of ice in one piece•Always place dry ice, cold packs or ice on top, as cold sinks downwards•Open purposeful and seldom•When on the way store the box at a cool, shady place and out of direct sunlight•Store and transport only in upright positionTechnical detailsMaterial: PEOuter dimensions (W x H x D): 68.5 x 50 x 48.5 cmInner dimensions (L x W x H): 42.5 x 29.2 x 34 cm Dimensions with packaging (W x H x D): 70 x 52 x 50 cmWeight (in kg): 14.9Weight with packaging (in kg): 17.3Filling capacity (max.): 50 lScope of delivery1 x Petromax Cool Box kx501 x User manual Go to User manual >>

Extra support for any adventure: The Adhesive Pad for the Petromax Cool Box With the Adhesive Pad you not only effectively protect your Cool Box kx50 from scratches and bumps but at the same time ensure for more grip. The thin cover made of synthetic foam is made custom-fit for the surface of the ultra-passive cooling systems kx50. The dense material creates a durable protective layer defying wind and weather. Thus, you and your Cool Box profit from the special protection against moisture, UV- radiation and temperature effects. Even if you have been in outdoor action up to the knee: Rough dirt can be removed easily by brushing or wiping off. In just a few steps the anti-slip pad is applied and directly provides you with more support during your very own adventures. The lashing points have been omitted in the pad; thus, you can still secure your ultra-passive cooling system before transport. The extra layer is available in two colours and in two designs each. Free selection between brown and grey – either with lines and Petromax lettering or with traditional dragon logo: You alone decide what your next nature experience looks like. Non-slip stand or comfortable seat? Both, because with functional Petromax accessories you stay flexible. The installed Adhesive Pad can be used in combination with the Seat Cushion for the Petromax Cool Box kx50 and provides you with the necessary freedom. How to apply the Adhesive Pad the right way 1. Before application, make sure that the surface of the lid is free of dirt by cleaning it thoroughly with water and a customary dishwashing detergent. Afterwards, dry with a cloth. 2. Remove the adhesive film on the back and hold the Adhesive Pad just over the lid of the Cool Box and align by centre. 3. When the position is correct start on one side of the lid and apply the edge of the Adhesive Pad flush. Do not press down yet, otherwise you cannot correct the position anymore! Now let the rest of the adhesive area follow slowly, until it rests completely on the Cool Box. 4. As soon as the edges lay exact you can press down the Adhesive Pad firmly with the palms of your hands. Technical Details Material: synthetic foam Dimensions: (H x W x D): 0.3 x 65.5 x 45.5 cm Weight packed: 560 g Colour: brown, grey Decor: lines and lettering, dragon logo (cut) Scope of delivery 1 x Adhesive Pad for Petromax Cool Box kx50

Extra support for any adventure: The Adhesive Pad for the Petromax Cool Box With the Adhesive Pad you not only effectively protect your Cool Box kx50 from scratches and bumps but at the same time ensure for more grip. The thin cover made of synthetic foam is made custom-fit for the surface of the ultra-passive cooling systems kx50. The dense material creates a durable protective layer defying wind and weather. Thus, you and your Cool Box profit from the special protection against moisture, UV- radiation and temperature effects. Even if you have been in outdoor action up to the knee: Rough dirt can be removed easily by brushing or wiping off. In just a few steps the anti-slip pad is applied and directly provides you with more support during your very own adventures. The lashing points have been omitted in the pad; thus, you can still secure your ultra-passive cooling system before transport. The extra layer is available in two colours and in two designs each. Free selection between brown and grey – either with lines and Petromax lettering or with traditional dragon logo: You alone decide what your next nature experience looks like. Non-slip stand or comfortable seat? Both, because with functional Petromax accessories you stay flexible. The installed Adhesive Pad can be used in combination with the Seat Cushion for the Petromax Cool Box kx50 and provides you with the necessary freedom. How to apply the Adhesive Pad the right way 1. Before application, make sure that the surface of the lid is free of dirt by cleaning it thoroughly with water and a customary dishwashing detergent. Afterwards, dry with a cloth. 2. Remove the adhesive film on the back and hold the Adhesive Pad just over the lid of the Cool Box and align by centre. 3. When the position is correct start on one side of the lid and apply the edge of the Adhesive Pad flush. Do not press down yet, otherwise you cannot correct the position anymore! Now let the rest of the adhesive area follow slowly, until it rests completely on the Cool Box. 4. As soon as the edges lay exact you can press down the Adhesive Pad firmly with the palms of your hands. Technical Details Material: synthetic foam Dimensions: (H x W x D): 0.3 x 65.5 x 45.5 cm Weight packed: 560 g Colour: brown, grey Decor: lines and lettering, dragon logo (cut) Scope of delivery 1 x Adhesive Pad for Petromax Cool Box kx50

Extra support for any adventure: The Adhesive Pad for the Petromax Cool Box With the Adhesive Pad you not only effectively protect your Cool Box kx50 from scratches and bumps but at the same time ensure for more grip. The thin cover made of synthetic foam is made custom-fit for the surface of the ultra-passive cooling systems kx50. The dense material creates a durable protective layer defying wind and weather. Thus, you and your Cool Box profit from the special protection against moisture, UV- radiation and temperature effects. Even if you have been in outdoor action up to the knee: Rough dirt can be removed easily by brushing or wiping off. In just a few steps the anti-slip pad is applied and directly provides you with more support during your very own adventures. The lashing points have been omitted in the pad; thus, you can still secure your ultra-passive cooling system before transport. The extra layer is available in two colours and in two designs each. Free selection between brown and grey – either with lines and Petromax lettering or with traditional dragon logo: You alone decide what your next nature experience looks like. Non-slip stand or comfortable seat? Both, because with functional Petromax accessories you stay flexible. The installed Adhesive Pad can be used in combination with the Seat Cushion for the Petromax Cool Box kx50 and provides you with the necessary freedom. How to apply the Adhesive Pad the right way 1. Before application, make sure that the surface of the lid is free of dirt by cleaning it thoroughly with water and a customary dishwashing detergent. Afterwards, dry with a cloth. 2. Remove the adhesive film on the back and hold the Adhesive Pad just over the lid of the Cool Box and align by centre. 3. When the position is correct start on one side of the lid and apply the edge of the Adhesive Pad flush. Do not press down yet, otherwise you cannot correct the position anymore! Now let the rest of the adhesive area follow slowly, until it rests completely on the Cool Box. 4. As soon as the edges lay exact you can press down the Adhesive Pad firmly with the palms of your hands. Technical Details Material: synthetic foam Dimensions: (H x W x D): 0.3 x 65.5 x 45.5 cm Weight packed: 560 g Colour: brown, grey Decor: lines and lettering, dragon logo (cut) Scope of delivery 1 x Adhesive Pad for Petromax Cool Box kx50

Extra support for any adventure: The Adhesive Pad for the Petromax Cool Box With the Adhesive Pad you not only effectively protect your Cool Box kx50 from scratches and bumps but at the same time ensure for more grip. The thin cover made of synthetic foam is made custom-fit for the surface of the ultra-passive cooling systems kx50. The dense material creates a durable protective layer defying wind and weather. Thus, you and your Cool Box profit from the special protection against moisture, UV- radiation and temperature effects. Even if you have been in outdoor action up to the knee: Rough dirt can be removed easily by brushing or wiping off. In just a few steps the anti-slip pad is applied and directly provides you with more support during your very own adventures. The lashing points have been omitted in the pad; thus, you can still secure your ultra-passive cooling system before transport. The extra layer is available in two colours and in two designs each. Free selection between brown and grey – either with lines and Petromax lettering or with traditional dragon logo: You alone decide what your next nature experience looks like. Non-slip stand or comfortable seat? Both, because with functional Petromax accessories you stay flexible. The installed Adhesive Pad can be used in combination with the Seat Cushion for the Petromax Cool Box kx50 and provides you with the necessary freedom. How to apply the Adhesive Pad the right way 1. Before application, make sure that the surface of the lid is free of dirt by cleaning it thoroughly with water and a customary dishwashing detergent. Afterwards, dry with a cloth. 2. Remove the adhesive film on the back and hold the Adhesive Pad just over the lid of the Cool Box and align by centre. 3. When the position is correct start on one side of the lid and apply the edge of the Adhesive Pad flush. Do not press down yet, otherwise you cannot correct the position anymore! Now let the rest of the adhesive area follow slowly, until it rests completely on the Cool Box. 4. As soon as the edges lay exact you can press down the Adhesive Pad firmly with the palms of your hands. Technical Details Material: synthetic foam Dimensions: (H x W x D): 0.3 x 65.5 x 45.5 cm Weight packed: 560 g Colour: brown, grey Decor: lines and lettering, dragon logo (cut) Scope of delivery 1 x Adhesive Pad for Petromax Cool Box kx50

Why the Enamel Bowls are the tough, lightweight tableware for your outdoor kitchen: Ideal for travelling due to low weight and hard-wearing quality Hygienic and impact-resistant thanks to stainless-steel rim Easy to clean due to dirt-resistant surface Sturdy and durable thanks to corrosion protection Available in three different sizesThe Petromax Enamel Bowls are a true lightweight. Optimally prepare and portion your food outdoors with these bowls that are suitable for hot as well as cold dishes. The sturdy and durable bowls are a must for adventurers exploring nature as well as retro style fans in the home kitchen.The material: Robust and durableEnamel - the proven compound of glass and steel makes your bowls extremely resistant and robust. The fired surface is heat and scratch-resistant. It can easily be cleaned without great effort. The bowls will not corrode and are fade-resistant. They will be on your side for an outdoor lifetime!Convenience with styleThe protective edge made of stainless steel hygienically locks the bowls which allows you to drink from them. Available in black or white, this bowl is a trusty companion on the go for everyone looking for something handy, light-weight and stylish. Each package contains a set of two enamel bowls in white. Technical data Material: steel, enamelledDimensions, approx. (H x W x D): 5.5 x 14.3 x 14.3 cmDimensions with packaging, approx. (H x W x D): 7 x 15.3 x 15.3 cmWeight, approx.: 150 gWeight with packaging, approx.: 362 g Scope of delivery: 2 x Petromax Enamel Bowls white, 2 pieces in a set (0.5 l), px-bowl-w

Why the Enamel Bowls are the tough, lightweight tableware for your outdoor kitchen: Ideal for travelling due to low weight and hard-wearing quality Hygienic and impact-resistant thanks to stainless-steel rim Easy to clean due to dirt-resistant surface Sturdy and durable thanks to corrosion protection Available in three different sizesThe Petromax Enamel Bowls are a true lightweight. Optimally prepare and portion your food outdoors with these bowls that are suitable for hot as well as cold dishes. The sturdy and durable bowls are a must for adventurers exploring nature as well as retro style fans in the home kitchen.The material: Robust and durableEnamel - the proven compound of glass and steel makes your bowls extremely resistant and robust. The fired surface is heat and scratch-resistant. It can easily be cleaned without great effort. The bowls will not corrode and are fade-resistant. They will be on your side for an outdoor lifetime!Convenience with styleThe protective edge made of stainless steel hygienically locks the bowls which allows you to drink from them. Available in black or white, this bowl is a trusty companion on the go for everyone looking for something handy, light-weight and stylish. Each package contains a set of two enamel bowls in white. Technical data Material: steel, enamelledDimensions, approx. (H x W x D): 5.5 x 14.3 x 14.3 cmDimensions with packaging, approx. (H x W x D): 7 x 15.3 x 15.3 cmWeight, approx.: 150 gWeight with packaging, approx.: 362 g Scope of delivery: 2 x Petromax Enamel Bowls black, 2 pieces in a set (0.5 l), px-bowl-s

Why the Petromax Enamel Plates are the tough tableware for outdoor chefs: Food-safe tableware for outdoor adventurers Hygienic and impact-resistant thanks to stainless-steel rim Scratch-resistant andquick to clean thanks to easy handling Ideal for on the move due to low weight Available in three different sizesOutdoor fans appreciate the low weight and durability of enamel tableware which makes the Petromax Enamel Plates a necessity for your equipment. Not only at the campfire, our plates enable easy barbecue, but also on your home kitchen table, the retro design is a real eye catcher. The material: Durable and robustEnamel provides many advantages that are combined in the Petromax tableware. The compound of glass and steel makes the plates extremely resistant and robust. The fired surface is heat and scratch-resistant. It can easily be cleaned without great effort. The plates will not corrode and are fade-resistant. They will be on your side for an outdoor lifetime!Convenience with styleThe protective ring of stainless steel hygienically locks and protects the delicate edge of your plate. Available in black or white, this plate is a trusty companion for every adventurer looking for something handy, light-weight and stylish. Each package contains a set of two enamel plates of one colour. Technical data Material: steel, enamelledDimensions, approx. (H x W x D): 2.5 x 22.5 x 22.5 cmDimensions with packaging, approx. (H x W x D): 3.8 x 23 x 23 cmWeight, approx.: 206 gWeight with packaging, approx.: 450 gScope of delivery2 x Petromax Enamel Plate white, 2 pieces in set (22 cm), px-plate-w

Why the Petromax Enamel Plates are the tough tableware for outdoor chefs: Food-safe tableware for outdoor adventurers Hygienic and impact-resistant thanks to stainless-steel rim Scratch-resistant andquick to clean thanks to easy handling Ideal for on the move due to low weight Available in three different sizesOutdoor fans appreciate the low weight and durability of enamel tableware which makes the Petromax Enamel Plates a necessity for your equipment. Not only at the campfire, our plates enable easy barbecue, but also on your home kitchen table, the retro design is a real eye catcher. The material: Durable and robustEnamel provides many advantages that are combined in the Petromax tableware. The compound of glass and steel makes the plates extremely resistant and robust. The fired surface is heat and scratch-resistant. It can easily be cleaned without great effort. The plates will not corrode and are fade-resistant. They will be on your side for an outdoor lifetime!Convenience with styleThe protective ring of stainless steel hygienically locks and protects the delicate edge of your plate. Available in black or white, this plate is a trusty companion for every adventurer looking for something handy, light-weight and stylish. Each package contains a set of two enamel plates in black. Technical data Material: steel, enamelledDimensions, approx. (H x W x D): 2.5 x 22.5 x 22.5 cmDimensions with packaging, approx. (H x W x D): 3.8 x 23 x 23 cmWeight, approx.: 206 gWeight with packaging, approx.: 450 gScope of delivery2 x Petromax Enamel Plate black, 2 pieces in set (22 cm), px-plate-s

The Buff Leather Apron is your perfect protection against fat spatter and dirt during any grilling adventure. It offers comfortable fit as well as optimum durability and, thanks to its adjustable, crossed back strap, it provides comfortable shoulder fit for hours. Back strap and the separate waist belt allow for individual adjustment and safe fit at the fire.Reinforced threads, riveted straps and belts ensure longevity as well as highest quality and, thanks to the cleverly placed pockets at chest and waist height and the lateral support strap, the Buff Leather Apron features best functionality. Your towel, grilling and cooking tools will have their place right at your side.Through gentle dying and colouring of the material, the natural grain of the buff leather is maintained which gives your apron an original and unique patina. The Buff Leather Apron ab-x in dark brown with cognac coloured applications has an original charm, giving you as chef at the fire a lasting impression.Also available as version with neck strap (ab-b).Technical dataWeight: 0,9 kgMaterial: Colour: Scope of delivery1 x Buffalo Leather Apron with cross back straps

All-round protection with the Petromax Wool BlanketThe Wool Blanket made of 100 % new sheep's wool completes your equipment for flexible adventures in nature. Whether you need to take a short rest between forest and meadow, or you want to savour your night at the campfire under the open sky to the last minute: with the Petromax Wool Blanket nothing will get in the way of your outdoor experience. The natural material properties optimally support you as the strongly condensed wool fibres make the surface resistant against sparks and moisture. Also, the blanket offers high thermal retention and keeps you warm with your very own body temperature. That way, you do not have to break camp on cooler days. Edges bordered with merino wool as well as a leather patch with the traditional logo on the top side visually tune you in for your next trip into nature.The Petromax Wool Blanket with handle for transport: Adventure to go please! Excellent when on the way: The Petromax Wool Blanket comes with a suitable leather strap. To save space for transport your roll up the blanket and fasten it with the two adjustable straps. Thanks to the extra handle you take yourself and your natural companion directly into the next adventure. Also available in moss green/blackManufactured in Germany.Products featuresspark-resistant, water-repellent, rounded corners, bordered with white merino wool yarn (T-stitch), leather strap and handle for transport included, leather logo patch on top sideTechnical DetailsMaterial: 100 % new sheep's woolMaterial edge stitch: merino woolColours: smoky white/dark grey Size: 150 x 200 cmWeight: 1 kg