Petromax HK250 (Parts)

Our numerous spare parts and accessories for the Petromax HK250 are available here.

Back to homepage

Lead Washer for Carburettor and Rapid Preheater HK150/HK250/HK350/HK500

The washer made of lead is suitable for a perfect sealing of the carburettor and the rapid pre-heater of all Petromax models. The Lead Washer should not be used with petrol lamps. The Viton Washer (90v) should be used in that case.Lead has the property to be malleable. It can become distorted and can thus be easily placed in the appropriate place and firmly screwed in, so that it is directly squeezed between the components.It is recommended to replace the washer each time the corresponding screw is unscrewed.Technical dataMaterial: leadL x W x H (in cm): 1,5 x 1,5 x 0,2L x W x H w/ packaging (in cm): x x Weight (in g): 1Weight with packaging (in g): 1Scope of delivery1 x Lead Washer for Carburettor and Rapid Preheater HK150/HK250/HK350/HK500

€1.49*

Viton Washer for Carburettor and Rapid Preheater HK150/HK250/HK350/HK500

The washer made of Viton is suitable for sealing the carburettor and the rapid pre-heater of all Petromax models. Its advantage is that it can be used in many cases. Moreover, Viton is petrol-resistant, which makes the washer suitable for repairing old petrol lamps.Technical dataMaterial: Viton®Scope of delivery1 x Viton Washer for Carburettor and Rapid Preheater HK150/HK250/HK350/HK500

€1.99*

Leather Washer Holder with Nut

Technical dataMaterial: steel, chrome-plated & brassL x W x H (in cm): 2 x 2 x 1L x W x H w/ packaging (in cm): x x Weight (in g): 1Weight with packaging (in g): 1Scope of delivery1 x Leather Washer Holder with Nut

€3.49*

Graphite Gasket HK150/HK250/HK350/HK500

This Graphite Gasket is suitable for the Petromax models HK150/250/350/500.Technical dataMaterial: graphiteScope of delivery1 x Graphite Gasket HK150/HK250/HK350/HK500

€1.49*

Washer for Manometer HK150/HK250/HK350/HK500

Washer for pressure gauge, suited to all Petromax models HK150/250/350/500.Technical dataMaterial: rubberL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 3Weight with packaging (in g): 3Scope of delivery

€2.49*

Pump Valve with Washer HK150/HK250/HK350/HK500

The set consisting of a pump valve and a lead washer is suited to all Petromax models HK150/250/350/500.Technical dataMaterial: brass & leadL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 10Weight with packaging (in g): 10Scope of delivery

€10.49*

Leather Washer for Pump Piston HK150/HK250/HK350/HK500

This Leather Washer for Pump Piston is suitable for all Petromax models HK150/250/350/500. Before the installation the leather washer must be greased and softly kneaded. The Petromax Technical Petroleum Jelly is perfectly suited to that purpose (#vas).Technical dataMaterial: leatherScope of delivery1 x Leather Washer for Pump Piston HK150/HK250/HK350/HK500

€5.49*

Viton Washer for Pump Valve HK150/HK250/HK350/HK500

The washer made of Viton is suitable for sealing the pump valve of all Petromax models. Its advantage is that it can be used in many cases. Moreover, Viton is petrol-resistant, which makes the washer suitable for repairing old petrol lamps.Technical dataMaterial: Viton®L x W x H (in cm): 1,1 x 1,1 x 0,1L x W x H w/ packaging (in cm): 1,1 x 1,1 x 0,1Weight (in g): 1Weight with packaging (in g): 1Scope of delivery1 x Viton Washer for Pump Valve HK150/HK250/HK350/HK500

€1.49*

Carburettor Valve HK150/HK250/HK350/HK500

Technical dataMaterial: brass, rubber & steelL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 3Weight with packaging (in g): 3Scope of delivery1 x Carburettor Valve HK150/HK250/HK350/HK500

€4.99*

Carburettor Valve Gasket HK150/HK250/HK350/HK500

Technical dataMaterial: brass & rubberL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 3Weight with packaging (in g): 3Scope of delivery1 x Carburettor Valve Gasket HK150/HK250/HK350/HK500

€1.99*

Lead Washer for Pump Valve HK150/HK250/HK350/HK500

The washer made of lead is suitable for a perfect sealing of the pump valve of all Petromax models. The Lead Washer should not be used with petrol lamps. The Viton Washer (83v) should be used in that case.Lead has the property to be malleable; it can become distorted and can thus be easily placed in the appropriate place and firmly screwed in, so that it is directly squeezed between the components.It is recommended to replace the washer each time the corresponding screw is unscrewed.Technical dataMaterial: leadL x W x H (in cm): 1,2 x 1,2 x 0,1L x W x H w/ packaging (in cm): x x Weight (in g): 1Weight with packaging (in g): 1Scope of delivery1 x Lead Washer for Pump Valve HK150/HK250/HK350/HK500

€1.49*

Socket with Washer & Screw HK150/HK250/HK350/HK500

The socket with washer and screw is a component of the tilt lever and, thus, the rapid preheater.Technical dataMaterial: brass & rubberL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 2Weight with packaging (in g): 2Scope of delivery1 x Socket with Washer & Screw HK150/HK250/HK350/HK500

€3.99*

Manometer HK150/HK250/HK350/HK500 Chrome

The Manometer is inserted into the upper part of the tank. The manometer washer ensures that no air can go through during use, avoiding any pressure loss. The optimal operating pressure is coloured in red on a scale from 0 to 3 bars.Technical dataMaterial: brass, nickel- and chrome-platedScope of delivery1 x Manometer HK150/HK250/HK350/HK500 Chrome

€23.99*

Pump Adapter HK150/HK250/HK350/HK500 Chrome

The Air Pump Adapter simplifies the pumping of your lamp by replacing the manual pump by the adapter. The pump stopper just has to be unscrewed together with its piston and replaced by the air pump adapter. You can then connect a classic air pump or a compressor to the adapter and build up the pressure rapidly and comfortably. The use of an air pump adapter also extends the longevity of the mantle. Indeed, it will avoid tremors caused by a manual pumping. The air pump adapter suits to all Petromax models : HK150/250/350/500. Technical dataScope of delivery

€17.99*

Brass Gauze

This gauze regulates variations in brightness and optimizes the performance of the lampe. The gauze is suitable for all high-powered lamps and can be cut at will.How to installFirst, the carburettor upper part must be unscrewed. The gauze must then be wrapped round the upper part of the conduction rod. (component 101 on the plan). The gauze must be close-fitting. The connection rod together with the gaze can subsequently be inserted in the carburettor upper part.Technical dataMesh size: Wire thickness: 0,016 cmL x W x H (in cm): 6 x 12 x 0,01L x W x H w/ packaging (in cm): x x Weight (in g): 6Weight with packaging (in g): 6Scope of delivery

€2.49*

Manometer Glass HK150/HK250/HK350/HK500

The round glass serves as a spare part for a faulty Manometer Glass. It protects the display from dirt and damage.Technical dataMaterial: glassL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 3Weight with packaging (in g): 3Scope of delivery

€2.99*

Instructions for Use HK150/HK250/HK350/HK500

The instructions for use describe in detail the proper use of the Petromax Lamp (HK500, HK350, HK250 and HK150) in ten language. Included languages are German. English, French, Spanish, Turkish, Russian, Korean, Japanese, Finnish, Swedish.Technical dataL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 30Weight with packaging (in g): 30Scope of delivery1 x Instructions for Use HK150/HK250/HK350/HK500

€3.49*

Needle Wrench HK150/HK250/HK350/HK500

The Needle wrench serves to screw and unscrew the needle for the nozzle of the carburettor for the Petromax models HK150/HK250/HK350/HK500.Technical dataMaterial: brassScope of delivery1 x Needle wrench HK150/HK250/HK350/HK500

€2.49*

Needle for Manual Cleaning HK150/HK250/HK350/HK500

With this Needle for Manual Cleaning, the Nozzle of the Rapid Pre-heater of all Petromax models HK150/250/350/500 can be cleaned.Technical dataL x W x H (in cm): 0,1 x 1,6 x 11,2L x W x H w/ packaging (in cm): 0,1 x 1,6 x 11,2Weight (in g): 5Weight with packaging (in g): 5Scope of delivery1 x Needle for Manual Cleaning HK150/HK250/HK350/HK500

€2.49*

Monkey wrench HK150/HK250/HK350/HK500

With this monkey wrench, many different screws of the Petromax models HK150/250/350/500 can be unscrewed so that maintenance and adjustment work can be carried out.Technical dataMaterial: steelScope of delivery1 x Monkey wrench HK150/HK250/HK350/HK500

€6.49*

Needle for Nozzle HK250

This Needle for Nozzle is suitable for the Petromax model HK250.Technical dataMaterial: brassL x W x H (in cm): 0,3 x 0,3 x 1,7L x W x H w/ packaging (in cm): x x Weight (in g): 2Weight with packaging (in g): 2Scope of delivery

€3.99*

Carburettor Valve Spring HK150/HK250/HK350/HK500

Technical dataMaterial: steelL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 3Weight with packaging (in g): 3Scope of delivery1 x Carburettor Valve Spring HK150/HK250/HK350/HK500

€1.99*

Screw for Manometer HK150/HK250/HK350/HK500 Chrome

This screw is installed on the manometer. It is used to maintain the operating pressure or to lower it when necessary.Technical dataMaterial: brass, nickel- and chrome-platedScope of delivery1 x Screw for Manometer HK150/HK250/HK350/HK500 Chrome

€4.49*

Pump Adapter HK150/HK250/HK350/HK500 Brass

€17.99*

Back to homepage