Petromax HK150 (Parts)

The washer made of lead is suitable for a perfect sealing of the carburettor and the rapid pre-heater of all Petromax models. The Lead Washer should not be used with petrol lamps. The Viton Washer (90v) should be used in that case.Lead has the property to be malleable. It can become distorted and can thus be easily placed in the appropriate place and firmly screwed in, so that it is directly squeezed between the components.It is recommended to replace the washer each time the corresponding screw is unscrewed.Technical dataMaterial: leadL x W x H (in cm): 1,5 x 1,5 x 0,2L x W x H w/ packaging (in cm): x x Weight (in g): 1Weight with packaging (in g): 1Scope of delivery1 x Lead Washer for Carburettor and Rapid Preheater HK150/HK250/HK350/HK500

The washer made of Viton is suitable for sealing the carburettor and the rapid pre-heater of all Petromax models. Its advantage is that it can be used in many cases. Moreover, Viton is petrol-resistant, which makes the washer suitable for repairing old petrol lamps.Technical dataMaterial: Viton®Scope of delivery1 x Viton Washer for Carburettor and Rapid Preheater HK150/HK250/HK350/HK500

Technical dataMaterial: steel, chrome-plated & brassL x W x H (in cm): 2 x 2 x 1L x W x H w/ packaging (in cm): x x Weight (in g): 1Weight with packaging (in g): 1Scope of delivery1 x Leather Washer Holder with Nut

This Graphite Gasket is suitable for the Petromax models HK150/250/350/500.Technical dataMaterial: graphiteScope of delivery1 x Graphite Gasket HK150/HK250/HK350/HK500

The washer made of lead is suitable for a perfect sealing of the pump valve of all Petromax models. The Lead Washer should not be used with petrol lamps. The Viton Washer (83v) should be used in that case.Lead has the property to be malleable; it can become distorted and can thus be easily placed in the appropriate place and firmly screwed in, so that it is directly squeezed between the components.It is recommended to replace the washer each time the corresponding screw is unscrewed.Technical dataMaterial: leadL x W x H (in cm): 1,2 x 1,2 x 0,1L x W x H w/ packaging (in cm): x x Weight (in g): 1Weight with packaging (in g): 1Scope of delivery1 x Lead Washer for Pump Valve HK150/HK250/HK350/HK500

This 17-parted set for Petromax HK500 includes all required components to keep your lamp in good condition. You get amongst others; incandescent mantles, needle (#68), or spray nozzle (#50) that are also compatible with the Petromax HK350. Your set includes: - Clay burner (#3)- 3 Petromax incandescent mantles HK500 (#helox-500)- Manometer gasket (#11)- Valve insert (#17)- Leather collar (#46)- Spray nozzle (#50)- Needle (#68)- Valve gasket (#83)- 2 gaskets (#90)- Graphite pack (#108)- Carburettor valve gasket (#193)- Carburettor valve spring (#194)- Carburettor valve jacket (#195)- Socket with gasket and screw (#229) The number behind every component corresponds to its item number but also to its number in the Petromax construction plan.Technical dataL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 110Weight with packaging (in g): 110Scope of delivery1 x Spare Parts Set HK500

The set consisting of a pump valve and a lead washer is suited to all Petromax models HK150/250/350/500.Technical dataMaterial: brass & leadL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 10Weight with packaging (in g): 10Scope of delivery

The washer made of Viton is suitable for sealing the pump valve of all Petromax models. Its advantage is that it can be used in many cases. Moreover, Viton is petrol-resistant, which makes the washer suitable for repairing old petrol lamps.Technical dataMaterial: Viton®L x W x H (in cm): 1,1 x 1,1 x 0,1L x W x H w/ packaging (in cm): 1,1 x 1,1 x 0,1Weight (in g): 1Weight with packaging (in g): 1Scope of delivery1 x Viton Washer for Pump Valve HK150/HK250/HK350/HK500

This Leather Washer for Pump Piston is suitable for all Petromax models HK150/250/350/500. Before the installation the leather washer must be greased and softly kneaded. The Petromax Technical Petroleum Jelly is perfectly suited to that purpose (#vas).Technical dataMaterial: leatherScope of delivery1 x Leather Washer for Pump Piston HK150/HK250/HK350/HK500

Technical dataMaterial: brass & rubberL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 3Weight with packaging (in g): 3Scope of delivery1 x Carburettor Valve Gasket HK150/HK250/HK350/HK500

Technical dataMaterial: brass, rubber & steelL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 3Weight with packaging (in g): 3Scope of delivery1 x Carburettor Valve HK150/HK250/HK350/HK500

Washer for pressure gauge, suited to all Petromax models HK150/250/350/500.Technical dataMaterial: rubberL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 3Weight with packaging (in g): 3Scope of delivery

The socket with washer and screw is a component of the tilt lever and, thus, the rapid preheater.Technical dataMaterial: brass & rubberL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 2Weight with packaging (in g): 2Scope of delivery1 x Socket with Washer & Screw HK150/HK250/HK350/HK500

The Air Pump Adapter simplifies the pumping of your lamp by replacing the manual pump by the adapter. The pump stopper just has to be unscrewed together with its piston and replaced by the air pump adapter. You can then connect a classic air pump or a compressor to the adapter and build up the pressure rapidly and comfortably. The use of an air pump adapter also extends the longevity of the mantle. Indeed, it will avoid tremors caused by a manual pumping. The air pump adapter suits to all Petromax models : HK150/250/350/500. Technical dataScope of delivery

This Needle for Nozzle is suitable for the Petromax model HK150.Technical dataMaterial: brassL x W x H (in cm): 0,3 x 0,3 x 1,7L x W x H w/ packaging (in cm): x x Weight (in g): 2Weight with packaging (in g): 2Scope of delivery

This gauze regulates variations in brightness and optimizes the performance of the lampe. The gauze is suitable for all high-powered lamps and can be cut at will.How to installFirst, the carburettor upper part must be unscrewed. The gauze must then be wrapped round the upper part of the conduction rod. (component 101 on the plan). The gauze must be close-fitting. The connection rod together with the gaze can subsequently be inserted in the carburettor upper part.Technical dataMesh size: Wire thickness: 0,016 cmL x W x H (in cm): 6 x 12 x 0,01L x W x H w/ packaging (in cm): x x Weight (in g): 6Weight with packaging (in g): 6Scope of delivery

The Manometer is inserted into the upper part of the tank. The manometer washer ensures that no air can go through during use, avoiding any pressure loss. The optimal operating pressure is coloured in red on a scale from 0 to 3 bars.Technical dataMaterial: brass, nickel- and chrome-platedScope of delivery1 x Manometer HK150/HK250/HK350/HK500 Chrome

With this Needle for Manual Cleaning, the Nozzle of the Rapid Pre-heater of all Petromax models HK150/250/350/500 can be cleaned.Technical dataL x W x H (in cm): 0,1 x 1,6 x 11,2L x W x H w/ packaging (in cm): 0,1 x 1,6 x 11,2Weight (in g): 5Weight with packaging (in g): 5Scope of delivery1 x Needle for Manual Cleaning HK150/HK250/HK350/HK500

The instructions for use describe in detail the proper use of the Petromax Lamp (HK500, HK350, HK250 and HK150) in ten language. Included languages are German. English, French, Spanish, Turkish, Russian, Korean, Japanese, Finnish, Swedish.Technical dataL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 30Weight with packaging (in g): 30Scope of delivery1 x Instructions for Use HK150/HK250/HK350/HK500

The Needle wrench serves to screw and unscrew the needle for the nozzle of the carburettor for the Petromax models HK150/HK250/HK350/HK500.Technical dataMaterial: brassScope of delivery1 x Needle wrench HK150/HK250/HK350/HK500

Thanks to this Tool Set, composed of a Universal Key (#66) and a Needle for Manual Cleaning (#180), the maintenance and the cleaning of all Petromax models HK150/250/350/500 are trouble-free. The Universal Key allows many different screws of the Petromax models HK150/250/350/500 to be unscrewed, whereas the Needle for Manual Cleaning is designed for cleaning the nozzle of the rapid pre-heater.Technical dataL x W x H (in cm): 14 x 5,5 x 0,4L x W x H w/ packaging (in cm): 14 x 5,5 x 0,4Weight (in g): 65Weight with packaging (in g): 65Scope of delivery1 x Monkey wrench HK150/HK250/HK350/HK5001 x Needle for Manual Cleaning HK150/HK250/HK350/HK500

This Nozzle is suitable for the Petromax model HK150.Technical dataMaterial: brassL x W x H (in cm): 0,9 x 1 x 1,2L x W x H w/ packaging (in cm): x x Weight (in g): 4Weight with packaging (in g): 4Scope of delivery1 x Nozzle HK150

This complete pump is suited to the Petromax models HK150/250/350/500. The colour of the pump cover is chrome and therefore fits the chrome-coloured Petromax high-powered lamp harmoniously. The pump knob is available in blue or black. The black knob does not bear the inscription Petromax. The Petromax pure Vaseline for technical purposes (#vas) is perfectly suited to an optimal care of the included leather system.Technical dataMaterial (Pump knob): plasticMaterial (Carburettor): leatherMaterial (Piston Rod): brass, nickel- and chrome-platedScope of delivery1 x Pump HK150/HK250/HK350/HK500 Chrome

The round glass serves as a spare part for a faulty Manometer Glass. It protects the display from dirt and damage.Technical dataMaterial: glassL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 3Weight with packaging (in g): 3Scope of delivery