Petromax HK350 (Parts)

The washer made of lead is suitable for a perfect sealing of the carburettor and the rapid pre-heater of all Petromax models. The Lead Washer should not be used with petrol lamps. The Viton Washer (90v) should be used in that case.Lead has the property to be malleable. It can become distorted and can thus be easily placed in the appropriate place and firmly screwed in, so that it is directly squeezed between the components.It is recommended to replace the washer each time the corresponding screw is unscrewed.Technical dataMaterial: leadL x W x H (in cm): 1,5 x 1,5 x 0,2L x W x H w/ packaging (in cm): x x Weight (in g): 1Weight with packaging (in g): 1Scope of delivery1 x Lead Washer for Carburettor and Rapid Preheater HK150/HK250/HK350/HK500

The washer made of Viton is suitable for sealing the carburettor and the rapid pre-heater of all Petromax models. Its advantage is that it can be used in many cases. Moreover, Viton is petrol-resistant, which makes the washer suitable for repairing old petrol lamps.Technical dataMaterial: Viton®Scope of delivery1 x Viton Washer for Carburettor and Rapid Preheater HK150/HK250/HK350/HK500

Technical dataMaterial: steel, chrome-plated & brassL x W x H (in cm): 2 x 2 x 1L x W x H w/ packaging (in cm): x x Weight (in g): 1Weight with packaging (in g): 1Scope of delivery1 x Leather Washer Holder with Nut

This Graphite Gasket is suitable for the Petromax models HK150/250/350/500.Technical dataMaterial: graphiteScope of delivery1 x Graphite Gasket HK150/HK250/HK350/HK500

The washer made of lead is suitable for a perfect sealing of the pump valve of all Petromax models. The Lead Washer should not be used with petrol lamps. The Viton Washer (83v) should be used in that case.Lead has the property to be malleable; it can become distorted and can thus be easily placed in the appropriate place and firmly screwed in, so that it is directly squeezed between the components.It is recommended to replace the washer each time the corresponding screw is unscrewed.Technical dataMaterial: leadL x W x H (in cm): 1,2 x 1,2 x 0,1L x W x H w/ packaging (in cm): x x Weight (in g): 1Weight with packaging (in g): 1Scope of delivery1 x Lead Washer for Pump Valve HK150/HK250/HK350/HK500

The set consisting of a pump valve and a lead washer is suited to all Petromax models HK150/250/350/500.Technical dataMaterial: brass & leadL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 10Weight with packaging (in g): 10Scope of delivery

The washer made of Viton is suitable for sealing the pump valve of all Petromax models. Its advantage is that it can be used in many cases. Moreover, Viton is petrol-resistant, which makes the washer suitable for repairing old petrol lamps.Technical dataMaterial: Viton®L x W x H (in cm): 1,1 x 1,1 x 0,1L x W x H w/ packaging (in cm): 1,1 x 1,1 x 0,1Weight (in g): 1Weight with packaging (in g): 1Scope of delivery1 x Viton Washer for Pump Valve HK150/HK250/HK350/HK500

This clear glass for Petromax HK350/500 is made of high-temperature resistant borosilicate glass. The robust borosilicate glass from the company Schott is characterised by its excellent quality. Technical details Material: glass Diameter: 110 mm Height: 115 mm Thickness: 2.5 mm Scope of delivery 1 x Glass HK350/HK500 Transparent

This Leather Washer for Pump Piston is suitable for all Petromax models HK150/250/350/500. Before the installation the leather washer must be greased and softly kneaded. The Petromax Technical Petroleum Jelly is perfectly suited to that purpose (#vas).Technical dataMaterial: leatherScope of delivery1 x Leather Washer for Pump Piston HK150/HK250/HK350/HK500

Technical dataMaterial: brass & rubberL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 3Weight with packaging (in g): 3Scope of delivery1 x Carburettor Valve Gasket HK150/HK250/HK350/HK500

Technical dataMaterial: brass, rubber & steelL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 3Weight with packaging (in g): 3Scope of delivery1 x Carburettor Valve HK150/HK250/HK350/HK500

Washer for pressure gauge, suited to all Petromax models HK150/250/350/500.Technical dataMaterial: rubberL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 3Weight with packaging (in g): 3Scope of delivery

The socket with washer and screw is a component of the tilt lever and, thus, the rapid preheater.Technical dataMaterial: brass & rubberL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 2Weight with packaging (in g): 2Scope of delivery1 x Socket with Washer & Screw HK150/HK250/HK350/HK500

This chrome-coloured Preheating Cup is to be filled with spirit in order to preheat the lamp. It is suitable for the Petromax models HK250/350/500.Technical dataMaterial: brass, nickel- and chrome-platedScope of delivery1 x Preheating Cup HK250/HK350/HK500 Chrome

Thanks to the long, small bent filling tube of the Professional Spirit Bottle, the Preheating cup will be easily reached. Moreover, with the narrowed edge of the spout, the spirit can be better measured. Therefore, the Professional Spirit Bottle is perfectly suitable for an easy and clean filling of the Preheating cup of the Petromax lamp.Technical dataContent: 0,1 litre(s)L x W x H (in cm): 5,8 x 4,5 x 23L x W x H w/ packaging (in cm): x x Weight (in g): 20Weight with packaging (in g): 20Scope of delivery1 x Professional Spirit Bottle 100ml

The Air Pump Adapter simplifies the pumping of your lamp by replacing the manual pump by the adapter. The pump stopper just has to be unscrewed together with its piston and replaced by the air pump adapter. You can then connect a classic air pump or a compressor to the adapter and build up the pressure rapidly and comfortably. The use of an air pump adapter also extends the longevity of the mantle. Indeed, it will avoid tremors caused by a manual pumping. The air pump adapter suits to all Petromax models : HK150/250/350/500. Technical dataScope of delivery

This gauze regulates variations in brightness and optimizes the performance of the lampe. The gauze is suitable for all high-powered lamps and can be cut at will.How to installFirst, the carburettor upper part must be unscrewed. The gauze must then be wrapped round the upper part of the conduction rod. (component 101 on the plan). The gauze must be close-fitting. The connection rod together with the gaze can subsequently be inserted in the carburettor upper part.Technical dataMesh size: Wire thickness: 0,016 cmL x W x H (in cm): 6 x 12 x 0,01L x W x H w/ packaging (in cm): x x Weight (in g): 6Weight with packaging (in g): 6Scope of delivery

The Manometer is inserted into the upper part of the tank. The manometer washer ensures that no air can go through during use, avoiding any pressure loss. The optimal operating pressure is coloured in red on a scale from 0 to 3 bars.Technical dataMaterial: brass, nickel- and chrome-platedScope of delivery1 x Manometer HK150/HK250/HK350/HK500 Chrome

This frosted glass for Petromax HK350/500 is made of high-temperature resistant borosilicate glass from the company Schott. Thanks to the frosted glass, the bright light of the Petromax lamp is dimmed and evenly spread. Technical details Material: glass Diameter: 110 mm Height: 115 mm Thickness: 2.5 mm Scope of delivery 1 x Glass HK350/HK500 Frosted

This partially frosted glass for Petromax HK350/500 is made of high-temperature resistant borosilicate glass from the company Schott. The quality glass is subsequently frosted thanks to the sandblasting technique. The combination of frosted and clear surfaces is ideal to avoid a dazzling light depending on your viewing angle. The mantle and the spirit cup are also visible through the clear glass part. Technical details Material: glass Diameter: 110 mm Height: 115 mm Thickness: 2.5 mm Scope of delivery 1 x Glass HK350/HK500 Vertically Frosted

With this Needle for Manual Cleaning, the Nozzle of the Rapid Pre-heater of all Petromax models HK150/250/350/500 can be cleaned.Technical dataL x W x H (in cm): 0,1 x 1,6 x 11,2L x W x H w/ packaging (in cm): 0,1 x 1,6 x 11,2Weight (in g): 5Weight with packaging (in g): 5Scope of delivery1 x Needle for Manual Cleaning HK150/HK250/HK350/HK500

The instructions for use describe in detail the proper use of the Petromax Lamp (HK500, HK350, HK250 and HK150) in ten language. Included languages are German. English, French, Spanish, Turkish, Russian, Korean, Japanese, Finnish, Swedish.Technical dataL x W x H (in cm): x x L x W x H w/ packaging (in cm): x x Weight (in g): 30Weight with packaging (in g): 30Scope of delivery1 x Instructions for Use HK150/HK250/HK350/HK500

The reflector directs and reflects downwardly the light of your Petromax lamp.Thanks to it, you enjoy many advantages: when your lamp is installed in an elevated position, for instance thanks to the Petromax lantern hanger, the upper light does not get lost. Therefore, the lamp can light wide areas in a very efficient way. If you look your Petromax lamp from above you will not be dazzled since the reflector can also be used as visor. The Petromax top reflector is then not only a practical accessory, it gives the best-known high-pressure lantern its characteristic look. Technical dataMaterial: steel, chrome-platedScope of delivery1 x Top Reflector HK350/HK500 Chrome

The Needle wrench serves to screw and unscrew the needle for the nozzle of the carburettor for the Petromax models HK150/HK250/HK350/HK500.Technical dataMaterial: brassScope of delivery1 x Needle wrench HK150/HK250/HK350/HK500