Accessories Outdoor Ovens

With this single flue you replace one of the four upper segments of your versatile Petromax Tent Oven Loki2. You can link together the flues of Loki2 in random order, you merely need to keep in mind that the flue with damper always has to be attached to the corpus at first. Alternatively, you can individually extend the overall length of your flue with single flue segments and adjust to the height of your tent or tipi. However, do provide for sufficient stabilisation. Also suitable for Petromax Loki. Technical details W x H x D: 6,5 x 41 x 6,5 cm W x H x D in packing: 6,5 x 41 x 6,5 cm Weight: 600 g Weight in packing: 600 g

The bag with its reinforced walls and base offers a safe solution for the transport of the Rocket Stove rf33. The sturdy padded Ripstop fabric with an embroidered Petromax logo brings additional stability. Both handles as well as the removable shoulder strap are particularly reinforced and provide great wearing comfort. Accessories can be put in mesh pockets inside the lid or in the outer pockets with hook-and-loop fasteners. Technical dataMaterial: nylonColour: blackL x W x H (in cm): 28 x 32 x 34,5L x W x H w/ packaging (in cm): 8 x 27 x 32Weight (in g): 980Weight with packaging (in g): 1000Scope of delivery1 x Transport Bag for Rocket Stove rf33

Pointing the way: The Petromax Angled Tube Set enables you to set up your Loki2 inside your tent at the exact spot where you need it. Easily attached between two flue segments you guide your exhaust air outside in an angle of 45° or 90°, even though the sidewalls of the tent. Individually or bound together, one after another or shifted: Use the Angled Tube Set according to your local conditions or individual needs. This way you can fire up your Loki2 properly. Safety notes: Attach the Angled Tubes only above the Flue with Damper, otherwise the function of exhaust air control may be strongly impaired. Please keep in mind that an angled or horizontally fastened flue needs extra stabilisation or support. Technical Data Dimensions: 19.3 x 12.3 x 6 cm Weight: 372 g Scope of delivery 2x Angled Tubes each with 45° angle for Loki and Loki2

With this passage, the tubes of Petromax Loki are guided through various tents and can be permanently attached.Technical dataPipe Diameter: 6-8 cmAngle of inclination: 0° - 45°Scope of delivery1 x Tent kit for Loki Go to User manual >>

With this your fire will not get out of breath. For keeping control of the flames inside your Loki2 Petromax recommends the extra Charcoal Grate for your tent oven. He reliably separates embers and burning wood from ashes and thus ensures for optimum oxygen supply. In combination with the adjustable slider in the oven door you obtain an individually controllable combustion and facilitate the chimney effect. The Petromax Charcoal Grate is positioned through the oven door. Also suitable for use with the Petromax Loki. Here the Charcoal Grate is placed on the lower part of the corpus through the oven door. Technical Details Material: stainless steel Dimensions: 2 x 13.8 x 40.4 cm Weight: 352 g

Packed and carried along: The compact tent oven and camping stove Loki can be packed in this bag. Other accessories can be attached on the top of the bag thanks to two clip fasteners. Upholstered for first-class stability The transport bag is made of high-quality Ripstop fabric. It is thus particularly robust and tear-proof. Its inside is upholstered, so that nothing can wobble or slip. Both the handles and the removable length-adjustable shoulder strap are separately reinforced and ensure nice wearing comfort.Extra storage capacity for accessories in the cover In the bag cover there is a spacious zip pouch: accessories or small pieces such as Petromax Fire kit or the ash catcher can be packed here. The bag proves itself to be made for the Loki, for its cover takes on the shape of the flue. Moreover the bag is embroidered with the Petromax logo, which has always stood for excellent quality.Technical dataL x W x H (in cm): 35 x 55 x 30L x W x H w/ packaging (in cm): 35 x 55 x 5Weight (in g): 500Weight with packaging (in g): 520Scope of delivery1x Transport bag for Loki

For perspective and full fire control: With this oven door window you can replace a defect glass on the oven door of your Petromax Loki2. It consists of high-strength borosilicate glass and is extremely heat-resistant. Safety note: For changing the window please unscrew the screw with the nut of the lower retaining plate on the oven door. Be careful when removing the retaining plate on the inside, as the old, defect window or glass fragments might fall down. Afterwards you install the new window in reverse order. Technical Data Material: borosilicate glass Dimensions: 6 x 12 x 0.5 cm Weight: 60 g Scope of delivery 1x Oven door window for Loki2

With this passage, the tubes of Petromax Loki2 are guided through various canopies or shed roofs and can be permanently attached.Technical dataDimensions: 23 x 23 x 7 cm Suitable for: 60mm – 80mm pipe diameter; 0° – 20° angle of inclinationScope of delivery1 x Shed kit for Loki2 Go to User manual >>

With the Flue with damper you are the one steering. The flue segment is attached directly to the corpus of the tent oven Loki2 and guarantees for easy air suction control. Via the damper you adjust the airflow in such a way as for your fire to blaze. In doing so and in combination with the continuous airflow adjustment at the oven door of Loki2 you control to the point the heating and cooking performance of your tent oven. Caution: The flue with damper must be directly connected to the tent oven Loki2 and may not be used repeatedly within the flue segment structure. Repeated use of the segment and / or wrong positioning can lead to deterioration of the chimney effect as well as air outlet. Also suitable for Petromax Loki. Technical Data W x H x D: 11 x 41 x 6.5 cm W x H x D packed: 11 x 41 x 6.5 cm Weight: 750 g Weight in packing: 800 g Scope of delivery 1 x Flue with damper for Loki and Loki2 (spare part)

Fire crackles and while the Petromax Tent Oven serves you as heater and cooker at the same time you do not need to worry about safety when using the Spark Arrestor. Thanks to the additional end section for your flue risings sparks from the exhaust airflow are soundly stopped. The Spark Arrestor is attached to your flue as a final segment and rising sparks extinguish on the metal grid. This way you reduce fire hazard and protect your shelter as well as your surroundings. In addition, by using the Spark Arrestor you prevent moisture or leaves to penetrate from above and your flue remains clear at all times. The Spark Arrestor offers you extra stability: Via three loops the Spark Arrestor can be attached to the tent / tipi of fixed to the ground. This way your flue gets even more stability and even defies strong winds. Also suitable for Petromax Loki. Technical Data W x H x D: 11 x 11 x 17.5 cm W x H x D in packing: 12 x 12 x 21 cm Weight: 350 g Weight in packing: 380 g Scope of delivery 1x Spark Arrestor for Loki and Loki2

With the Tipi Sleeve for your tent oven Loki2 you combine traditional tent culture with functional equipment. The clever pluggable segment complements the flue at the desired spot and height and enables carefree use of your Loki2 inside the tipi. The attached longitudinal wings and cross frames work as heat distributors and provide for a quick temperature compensation. You, thus, guide your flue with the exhaust air from heating and cooking safely outside through the smoke hole or the opening in the centre of the tipi. As a result, the forked poles or the tent fabric will not be scorched. Note on use: According to type and structural height of your tipi you might need two tipi sleeves and / or additional flue segments. Also suitable for use with the Petromax Loki. Technical Data W x H x D: 16 x 42 x 16 cm W x H x D in packing: 18 x 45 x 18 cm Weight: 1500 g Weight in packing: 1550 g Scope of delivery 1x Tipi Sleeve for Loki and Loki2